The BRK SC7010B is one of the best hardwired combination Smoke and Carbon Monoxide Alarm on the market and serves multiple purposes in your home. First of all, the BRK SC7010B has the best smoke detection available with the advanced photoelectric sensing that works smarter to ensure you get fewer nuisance alarms, while providing the best protection for your home. In addition to smoke sensing, the BRK SC7010B can detect Carbon Monoxide levels in the room, alerting you if levels are unsafe. The BRK SC7010B incorporates a convenient 85db Spread Spectrum horn tone which alternates deeper frequencies which are easier for those who may be experiencing hearing difficulty or loss.
When interconnected to one of the 18 available connections, you can easily identify if this alarm has initiated the system with an Initiating Alarm latch. Once activated, the latch will trigger, causing the connected alarms to sound. Inside the alarm is a backup battery compartment in case of power loss with a green power indication light.
The BRK SC7010B utilizes the advanced 360 OptiPath technology which has improved detection ability near wall and ceilings where other alarms may have difficulties detecting properly.
Single button test/silence
Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm
Optipath 360 TechnologyTM - patented technology provides 360 degrees of direct access to the smoke sensor.
Perfect Mount - allows for easy alignment of alarm
Lower and varying frequency makes it easier for the elderly with normal aged related hearing loss to hear the horn.
Alarm Latch - remembers which unit initiated an alarm. Low Battery Latch: Visually indentifies unit in low battery condition.
End of Life Signal provides audible notification alarms needs to be replaced
10-Years Limited Warranty
Model # SC7010B
Weight 9.3 oz
Dimension 5.0" dia x 2.0"H
Operating Voltage 120V AC 60Hz with two 1.5V AA battery backup
Operating Current .05 amps (standby/alarm)
Temperature Range 40°F (4°C) to 100°F (38°C)
Humidity Range 10% to 95% relative humidity (RH)
Audio Alarm 85dB at 10 feet. Test/Silence Electronically simulates smoke condition, causing the unit to alarm Press and hold test/silence button
Alarm Reset Automatic when smoke and/or CO clears
Interconnections Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum of 12 smoke alarms. See user's manual for details.
Smoke/CO Sensor Photoelectric/Electrochemical
AC Power: Constant Green LED
DC Power: Intermittent Green LED
Local Alarm: Red LED flashes
Remote Alarm: Red LED off
Alarm Latch: Red LED flashes every 5 seconds after local alarm stops
Low Battery Latch: "Power" LED flashes green on for 2 seconds, off for 2 seconds.
Listing Listed to UL217 and UL2034 Standards