The RM4 is designed to activate an auxiliary device when an alarm is initiated. The RM4 Relay is intended for use with BRK and First Alert Smoke, Heat and Carbon Monoxide Alarms. The relay contacts will activate whenever any interconnected alarm sounds. The relay contacts will automatically deactivate a few seconds after the alarm stops sounding. The RM4 may be wired next to an AC alarm or from a remote location. This relay must be installed in a junction box.

Interconnects smoke alarms, carbon monoxide alarms and heat alarms with:
Lights,Bells,Door Closers,Sirens,Exit Signals,Escape Lights,Exhaust Fans,Other Auxiliary Devices

The BRK SC02B Battery Powered Smoke & Carbon Monoxide Combo Alarm is one of the best smoke & carbon monoxide combo alarms on the market today. The electrochemical carbon monoxide sensor is the most accurate on the market today. The BRK SC02B Battery Powered Smoke & Carbon Monoxide Combo Alarm is powered by a single 9V alkaline battery, and is tested and silenced by a single button. The BRK SC02B Battery Powered Smoke & Carbon Monoxide Combo Alarm has two latching features, the alarm Latch to simply determine initiating alarm once alarm condition has subsided, and the low battery latch: to visually establish what unit is in low battery condition. The BRK SC02B Battery Powered Smoke & Carbon Monoxide Combo Alarm has two silence features: Alarm Silence to briefly silence false alarms, and low Battery Silence to silence low battery chirp for up to eight hours. The Intelligent Sensing Technology of the BRK SC02B Battery Powered Smoke & Carbon Monoxide Combo Alarm helps to minimize the number of false alarms. The BRK perfect mount allows for easy positioning of the alarm. The BRK SC02B Battery Powered Smoke & Carbon Monoxide Combo Alarm also includes a dust cover to help to prevent from malfunction from dust. Included for installation of your BRK SC02B Combo Alarm are the anchors and screws.

- The BRK SC02B Battery Powered Smoke & Carbon Monoxide Combo Alarm is also backed by a 10 year limited warranty, administered by First Alert (the manufacturer)

SPECS:
- Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies Single button test/silence 9V Alkaline Battery Powered Two
- Latching features: Alarm Latch to easily identify initiating alarm after alarm condition has subsided.
- Low battery latch: to visually identify which unit is in low battery condition.
- Two Silence Features: Alarm Silence to temporarily silence nuisance alarms. Low Battery Silence to silence low battery chirp for up to 8 hours. Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms
- Perfect Mount - allows for easy alignment of alarm Dust Cover Includes mounting anchors and screws.
- End of Life Signal provides audible notification alarms needs to be replaced 10-Years Limited Warranty

Model # SCO2B
Weight 7.6 oz
Dimension 5.6" dia x 2.0"H
Operating Voltage 9V alkaline battery operated (not hardwired)
Temperature Range 40°F (4°C) to 100°F (38°C)
Humidity Range 10% to 95% relative humidity (RH)
Audio Alarm 85dB at 10 feet
Test/Silence - Electronically simulates smoke condition or carbon monoxide condition, causing the unit to alarm. Press and hold test/silence button Alarm Reset Automatic when smoke and/or CO clears
Smoke/CO Sensor Dual chamber ionization/Electrochemical Indicator Lights/Sounds
DC Power: Intermittent Green LED
Local Alarm: Red LED flashes rapidly
Alarm Latch: Red LED flashes 2 sec on/2 sec off after local alarm stops
Low Battery Latch: Green LED flashes on for 2 seconds, off for 2 seconds.
Note: Latching features are active for 15 minutes only.
Listing Listed to UL217 and UL2034 Standards

CLICK HERE TO GO TO PRC700B, THE REPLACEMENT UNIT


The First Alert SCO5B combines the benefits and protection of a photoelectric smoke alarm and carbon monoxide alarm, the battery powered First Alert SCO5B is your solution for a simple alarm that allows you to easily and safely meet local and state codes. This unit protects you and others from two of leading dangers within homes and building, carbon monoxide and smoke.
One of the best features of the First Alert SCO5B is its photoelectric sensor, which significantly reduces the frequency of nuisance alerts. Plus, its electrochemical CO alarm warns people of elevated levels of carbon monoxide. The unit runs of two AA batteries, and offers you to easily identify the type of alarm due to its two distinct lights and sounds for different types of hazards.
The First Alert SCO5B also has a convenient test and silencing button, and it works within a wide temperature range of 40 degrees to 100 degrees F and a humidity range of 10 to 90 percent relative humidity. Also note that this unit is UL listed and comes standard with a seven-year warranty offered directly from First Alert.
SPECS
Model # SCO5B
Warranty 7 years
Weight 8.4 oz
Dimension 5.0" dia x 2.0"H
Operating Voltage 2AA Alkaline Battery Powered
Temperature Range 40°F (4°C) to 100°F (38°C)
Humidity Range 10% to 95% relative humidity (RH)
Audio Alarm 85dB at 10 feet
Test/Silence Electronically simulates smoke and CO conditions, causing the unit to alarm and temporarily silence the alarm. Press and hold test/silence button
Alarm Reset Automatic when smoke and/or CO clears
Smoke/CO Sensor Photoelectric/Electrochemical
Indicator Lights/Sounds
DC Power: Intermittent Red Light
Alarm: Audio Alarm, rapidly flashing red light by corresponding smoke or CO indicator light
Listing Listed to UL217 and UL2034 Standards

» Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies

» Single button test/silence

» 9V Lithium Battery Powered (replace yearly)  » Two Latching features: Alarm Latch to easily identify initiating alarm after alarm condition has subsided. Low battery latch: to visually identify which unit is in low battery condition.

» Two Silence Features: Alarm Silence to temporarily silence nuisance alarms. Low Battery Silence to silence low battery chirp for up to 8 hours.

» Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms

» Perfect Mount - allows for easy alignment of alarm

» Dust Cover

» Includes mounting anchors and screws.

» End of Life Signal provides audible notification alarms needs to be replaced

» 7-Years Limited Warranty

DISCONTINUED!

THIS ALARM HAS BEEN REPLACED BY THE PRC700VB - CLICK HERE!

WE CAN ALSO RECOMMEND THE PRC710VB IN ITS PLACE (SAME ALARM WITH 10 YEAR SEALED BATTERY)



Featuring the brand’s dependable Voice Warning System w/ Location Alert, the First Alert SCO7B Photoelectric Carbon Monoxide and Smoke Combo Alarm gives the user the ability to set more than one alarm within any location. Known for being very reliable in emergency situations, it is the best solution available for your ultimate peace of mind. The First Alert SCO7B’s voice alarm allows for up to 11 programmable locations, and the alarm resets automatically once CO and/or smoke has cleared from an area. The unit features First Alert’s Optipath 360 mechanism, which offers 360 degrees of access to the sensor, as well as Perfect Mount technology that allows for the simple alignment of its alarm. There’s also its latching capability, which remembers the unite that initiated any particular alarm. In addition, the First Alert SCO7B can be silenced temporarily for up to 8 hours in the case of its low-battery chirp. The product comes with a 7-year manufacturer’s warranty, direct from First Alert. SPECS: Photoelectric Smoke and Electrochemical CO Sensors Exclusive! Voice alarm with programmable location. Programmable with up to eleven locations. Single button test/silence Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm Remote Control Silence/Test uses most remote controls to temporarily quiet unwanted alarms and test alarm functions Optipath 360 TechnologyTM - patented technology provides 360 degrees of direct access to the smoke sensor. Perfect Mount - allows for easy alignment of alarm Spread Spectrum Horn Tone - Lower and varying frequency makes it easier for the elderly with normal aged related hearing loss to hear the horn. Latching Features: Alarm Latch - remembers which unit initiated an alarm. Low Battery Latch: Visually indentifies unit in low battery condition. End of Life Signal provides audible notification alarms needs to be replaced 7-Years Limited Warranty Model # SCO7B Weight 8.4 oz Dimension 5.0" dia x 2.0"H Operating Voltage 2AA Alkaline Battery Powered Temperature Range 40F (4C) to 100F (38C) Humidity Range 10% to 95% relative humidity (RH) Audio Alarm 85dB at 10 feet Voice Output Choose from 11 pre-programmed locations. Warns of smoke or carbon monoxide (CO) danger and location Test/Silence Electronically simulates smoke and CO conditions, causing the unit to alarm and temporarily silence the alarm. Press and hold test/silence button Remote: Use vol/chn buttons on most household IR remotes. Manual: Press and hold test/silence button Alarm Reset Automatic when smoke and/or CO clears Smoke/CO Sensor Photoelectric/Electrochemical Indicator Lights/Sounds DC Power: Intermittent Red Light Alarm: Audio Alarm, Voice with location, rapidly flashing red light by corresponding smoke or CO indicator light Listing Listed to UL217 and UL2034 Standards

BRK PRC700B is a state of the art smoke and CO combination alarm designed to provide early warning of a fire or carbon monoxide danger. It features a photoelectric smoke sensing chamber and an electrochemical CO sensor. Two AA alkaline batteries power supply, 10 Year CO sensor, 10 Year End of Life feature and single button test/silence. This alarm has two silence features. Low Battery Silence: Temporarily silence the low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several minutes. It also features a tamper resistant locking pin that locks the alarm to the mounting bracket to prevent removal of batteries or alarm. Designed for wall or ceiling mounting. Includes mounting anchors and screws.

BRK PRC700VB (1039787) is a state of the art smoke and CO combination alarm designed to provide early warning of a fire or carbon monoxide danger. It features a photoelec- tric smoke sensing chamber, an electrochemical CO sensor and “Voice Warning with Location”. This exclusive feature incorporates a voice that will speak one of 11 pre-programmed locations and the danger detected. When the alarm sounds (if programmed for “basement”, for example) it will speak “Warning, evacuate, smoke in basement”. It features a Sweeping Horn Tone that has a lower and varying fre- quency that makes it easier for the elderly with normal age related hearing loss to hear the horn. Two AA alkaline batteries power supply, 10 Year CO sensor, 10 Year End of Life feature and single button test/silence. This alarm has two silence fea- tures. Low Battery Silence: Temporarily silence the low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several minutes. It also features a tam- per resistant locking pin that locks the alarm to the mounting bracket to prevent removal of batteries or alarm. De- signed for wall or ceiling mounting. Includes mounting an- chors and screws.

Newer product on the Market! Great option for hard to reach units and for apartment complexes or rentals. Once the unit is up it should be good to go for 10 YEARS! You should still test the unit by the manufacturers recommendation. The BRK SC9120LBL alarm features a dual ionization smoke sensing chamber and an electrochemical carbon monoxide sensor, an 85dB horn and a “silence” feature. This alarm features a 10 year battery backup. The battery drawer is shipped pre-locked so battery will not be discarded prematurely. Under normal conditions you should not have to replace the battery for the life of the alarm. “Intelligent Sensing Technology” system is designed to reduce nuisance alarms. “Latching Alarm Indication” remembers which unit initiated an alarm. When interconnected in a series, the unit that triggered the alarm rapidly flashes its red LED indicator. After the alarm condition subsides, the initiating unit will store in memory or “latch” the information and begin to flash the LED indicator 2 seconds on, 2 seconds off. The “Perfect Mount” system features a gasketless base and a mounting bracket that keeps the alarm secure over a wide rotation range to allow for true alignment. 120V AC/DC Ionization Smoke/CO Alarm with a 10YR Lithium Battery Back-up. The battery drawer is shipped pre-locked so battery will not be discarded prematurely. Under normal conditions you should not have to replace the battery for the life of the alarm.

SCO500, SCO500B, SCO501CN-3ST

BRK PRC710B is a state of the art smoke and CO combination alarm designed to provide early warning of a fire or carbon monoxide danger. It features a photoelectric smoke sensing chamber, an electrochemical CO sensor and a sealed 10-year lithium power cell power supply that is permanently installed. The tamperproof design will not allow the powercell to be removed. The low power warning indicator will cause the alarm to “chirp” when it reaches the end of its service life and needs to be replaced. Upon end of life, the unit meets UL requirements for disabling the alarm and non-reinstallation of unit to mounting bracket. It also features a tamper resistant locking pin that locks the alarm to the mounting bracket to prevent removal of the alarm. Perfect for apartment, dormitory or hotel applications. The sleek, low profile design complements any décor. Designed for wall or ceiling mounting. Includes mounting anchors and screws.

CLICK HERE TO GO TO PRC710B, THE REPLACEMENT UNIT

The PC910B 10-Year sealed battery operated lithium power tamper proof low profile photoelectric smoke alarm and Carbon Monoxide Alarm. Photoelectric Smoke alarms save lives by responding to slow burning, smoldering fires 10-15 minutes faster and this includes carbon monoxide protection as well. These low profile alarms make them much less obtrusive and the sealed 10 year lithium battery makes it NO MAINTENANCE! Just put it up and then test regularly, done

Model #PC910B

Tamperproof Sealed Alarm - Powercell cannot be removed.

Photoelectric smoke sensing technology

Electrochemical CO Sensor - Most accurate technology available for detecting carbon monoxide as compared to other sensing technologies.

Silence feature

Tamper resistant mounting bracket - Locks alarm to mounting bracket. Perfect for apartment and dormitory applications

10-Years Limited Warranty

Weight5.1 oz

Dimension4.92”L x 4.92”W x 0.96”H

Operating Voltage3V Lithium Power Cell

Temperature Range 40°F (4°C) to 100°F (38°C)

Humidity Range10% to 95% relative humidity (RH)

Audio Alarm85dB at 10 feet

Test/Silence Electronically simulates smoke or CO condition, causing the unit to alarm. Press and hold test/silence button.

Alarm ResetAutomatic when smoke or CO clears

Smoke/CO Sensor Photoelectric / Electrochemical

Indicator Lights/Sounds DC Power: Intermittent Red LED

Local Alarm: Audio alarm and rapidly flashing Red LED

ListingListed to UL2034 Standards

***Would you like this alarm with a 10 year Lithium Battery, and never have to change the battery for the life of the alarm?? We have it - CLICK HERE!***

Only the newest units(that we sell) manufactured in 2019!
The SC7010BV is one of the best hardwired combination alarms on the market! I have installed hundreds of the SC7010BV in homes and it is the best protection for your hallway and common area for hardwired units. The SC7010BV Features programmable voice that will alert the location of the unit and the danger detected. Photoelectric smoke sensing gives optimum protection for smoldering fires and reduces false alarms caused by cooking or showers and steam. The SC7010BV has Variable horn frequency which makes it easier for the elderly with age related hearing loss to hear the horn. The SC7010BV Provides hazard location information (such as smoke in the kitchen) for blind or visually impaired on the alarming unit. All the SC7010BV's will talk and tell you what is going on if its smoke vs Carbon Monoxide. The SC7010BV has two silence features: Low battery silence for up to 8 hours or temporarily silence for an unwanted nuisance alarm and two latching features: Alarm latch remembers which unit initiated the alarm and the low battery latch. 120V AC with battery back up (2 ''AA'') included. 10 year warranty. Vermont and Oregon approved. SPECS: Exclusive! Voice alarm with programmable location. Programmable with up to eleven locations. Single button test/silence Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm Optipath 360 TechnologyTM - patented technology provides 360 degrees of direct access to the smoke sensor. Perfect Mount - allows for easy alignment of alarm Spread Spectrum Horn Tone - Lower and varying frequency makes it easier for the elderly with normal aged related hearing loss to hear the horn. Latching Features: Alarm Latch - remembers which unit initiated an alarm. Low Battery Latch: Visually indentifies unit in low battery condition. Dust Cover Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. End of Life Signal provides audible notification alarms needs to be replaced 10-Years Limited Warranty Model # SC7010BV Weight 9.3 oz Dimension 5.0" dia x 2.0"H Operating Voltage 120V AC 60Hz with two 1.5V AA battery backup Operating Current .05 amps (standby/alarm) Temperature Range 40°F (4°C) to 100°F (38°C) Humidity Range 10% to 95% relative humidity (RH) Audio Alarm 85dB at 10 feet Voice Output Choice of 11 pre-programmed locations warns of smoke or CO danger and location of danger Test/Silence Electronically simulates smoke condition, causing the unit to alarm Press and hold test/silence button Alarm Reset Automatic when smoke and/or CO clears Interconnections Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum of 12 smoke alarms. See user's manual for details. Smoke/CO Sensor Photoelectric/Electrochemical Indicator Lights/Sounds AC Power: Constant Green LED DC Power: Intermittent Green LED Local Alarm: Red LED flashes, Voice: "Smoke" or "CO" with location Remote Alarm: Red LED off, Voice: "Smoke" or "CO" without location Alarm Latch: Red LED flashes every 5 seconds after local alarm stops Low Battery Latch: "Power" LED flashes green on for 2 seconds, off for 2 seconds. Listed to UL217 and UL2034 Standards

BRK 1039872 (PRC710VB) is a state of the art smoke and CO combination alarm designed to provide early warning of a fire or carbon monoxide danger. It features a photoelectric smoke sensing chamber, an electrochemical CO sensor and “Voice Warning with Location”. This exclusive feature incorporates a voice that will speak one of 11 pre-programmed locations and the danger detected. When the alarm sounds (if programmed for “basement”, for example) it will speak “Warning, evacuate, smoke in basement”. It features a sealed 10-year lithium power cell power supply that is permanently installed. The tamperproof design will not allow the powercell to be removed. The low power warning indicator will cause the alarm to “chirp” when it reaches the end of its service life and needs to be replaced. Upon end of life, the unit meets UL requirements for disabling the alarm and non-reinstallation of unit to mounting bracket. It also features a tamper resistant locking pin that locks the alarm to the mounting bracket to prevent removal of the alarm. Designed for wall or ceiling mounting. Includes mounting anchors and screws.

The BRK SC7010B is one of the best hardwired combination Smoke and Carbon Monoxide Alarm on the market and serves multiple purposes in your home. First of all, the BRK SC7010B has the best smoke detection available with the advanced photoelectric sensing that works smarter to ensure you get fewer nuisance alarms, while providing the best protection for your home. In addition to smoke sensing, the BRK SC7010B can detect Carbon Monoxide levels in the room, alerting you if levels are unsafe. The BRK SC7010B incorporates a convenient 85db Spread Spectrum horn tone which alternates deeper frequencies which are easier for those who may be experiencing hearing difficulty or loss.
When interconnected to one of the 18 available connections, you can easily identify if this alarm has initiated the system with an Initiating Alarm latch. Once activated, the latch will trigger, causing the connected alarms to sound. Inside the alarm is a backup battery compartment in case of power loss with a green power indication light.
The BRK SC7010B utilizes the advanced 360 OptiPath technology which has improved detection ability near wall and ceilings where other alarms may have difficulties detecting properly.
SPECS
Single button test/silence
Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm
Optipath 360 TechnologyTM - patented technology provides 360 degrees of direct access to the smoke sensor.
Perfect Mount - allows for easy alignment of alarm
Lower and varying frequency makes it easier for the elderly with normal aged related hearing loss to hear the horn.
Alarm Latch - remembers which unit initiated an alarm. Low Battery Latch: Visually indentifies unit in low battery condition.
Dust Cover
Easy Installation/Maintenance
End of Life Signal provides audible notification alarms needs to be replaced
10-Years Limited Warranty
Model # SC7010B
Weight 9.3 oz
Dimension 5.0" dia x 2.0"H
Operating Voltage 120V AC 60Hz with two 1.5V AA battery backup
Operating Current .05 amps (standby/alarm)
Temperature Range 40°F (4°C) to 100°F (38°C)
Humidity Range 10% to 95% relative humidity (RH)
Audio Alarm 85dB at 10 feet. Test/Silence Electronically simulates smoke condition, causing the unit to alarm Press and hold test/silence button
Alarm Reset Automatic when smoke and/or CO clears
Interconnections Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum of 12 smoke alarms. See user's manual for details.
Smoke/CO Sensor Photoelectric/Electrochemical
Indicator Lights/Sounds
   AC Power: Constant Green LED
   DC Power: Intermittent Green LED
   Local Alarm: Red LED flashes
   Remote Alarm: Red LED off
   Alarm Latch: Red LED flashes every 5 seconds after local alarm stops
   Low Battery Latch: "Power" LED flashes green on for 2 seconds, off for 2 seconds.
Listing Listed to UL217 and UL2034 Standards

CLICK HERE TO GO TO PRC710VB, THE REPLACEMENT UNIT

The PC910V 10-Year sealed battery operated lithium power tamper proof low profile photoelectric smoke alarm and Carbon Monoxide Alarm with VOICE! Photoelectric Smoke alarms save lives by responding to slow burning, smoldering fires 10-15 minutes faster and this includes carbon monoxide protection as well. These low profile alarms make them much less obtrusive and the sealed 10 year lithium battery makes it NO MAINTENANCE! Just put it up and then test regularly, done

Model #PC910V

Tamperproof Sealed Alarm - Powercell cannot be removed.

Photoelectric smoke sensing technology

Electrochemical CO Sensor - Most accurate technology available for detecting carbon monoxide as compared to other sensing technologies.

Voice Activation with Silence feature

Tamper resistant mounting bracket - Locks alarm to mounting bracket. Perfect for apartment and dormitory applications

10-Years Limited Warranty

Weight5.6 oz

Dimension4.92”L x 4.92”W x 0.96”H

Operating Voltage3V Lithium Power Cell

Temperature Range 40°F (4°C) to 100°F (38°C)

Humidity Range10% to 95% relative humidity (RH)

Audio Alarm85dB at 10 feet

Test/Silence Electronically simulates smoke or CO condition, causing the unit to alarm. Press and hold test/silence button.

Alarm ResetAutomatic when smoke or CO clears

Smoke/CO Sensor Photoelectric / Electrochemical

Indicator Lights/Sounds DC Power: Intermittent Red LED

Local Alarm: Audio alarm with Voice and rapidly flashing Red LED

ListingListed to UL2034 Standards

NOW WITH A 10 YEAR LIFESPAN AND WARRANTY!!! 120V Hardwired AC/DC with 10 Year Sealed Lithium Battery Backup
The BRK Model No. SC7010LBLV (CAT. 1042734) is a wire-in, 120V AC 60Hz single and/or multiple station combination smoke and carbon monoxide alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family dwellings as defined in standard NFPA 101. Model SC7010LBLV complies with UL217 and UL2034, CSFM, NFPA 72 and NFPA 720, HUD, FHA and other agencies that model their codes after the above agencies. It meets building codes where AC/DC photoelectric smoke and carbon monoxide alarms with and without voice are required and where 10 year sealed battery backup is specified. The BRK SC7010LBLV is a state-of-the-art hardwired with 10 year sealed Lithium battery backup smoke/ CO combo alarm that features a photoelectric smoke sensing chamber, an electrochemical CO sensor, an End of Life signal and Voice Warning with Location. This exclusive feature incorporates a voice that will speak one of 13 pre-programmed locations and the danger detected. This alarm features two latching features. Alarm Latch: Easily identifies initiating alarm even after alarm condition has subsided. Battery End of Life Latch: Identifies which unit is in low battery condition by blinking the green power light. Alarm also includes a single test/silence button to test alarm operating and silence nuisance alarms and CO Peak functionality to record highest CO level reached – helpful to first responders after an incident. Other features include an 85dB horn and single button test/silence feature. Connection to AC power is made with a Quick-Connect wiring harness (included).

SPECS:

You can download the spec sheet by clicking here!
Model #:SC7010LBLV
Cat/Sku #: 1042734

» Sensor: Photoelectric

» Warranty Claim: 10-Year

» Package Type: Box

» Color: White

» Battery backup: Y

Onelink Smart Smoke + Carbon Monoxide Alarm - Battery Operated

Add intelligent protection to your home with the Onelink Smoke & Carbon Monoxide alarm. This 2-in-1 combo alarm detects both smoke and carbon monoxide. Regardless of whether you're home or away, you'll be notified when smoke or co is detected. This First Alert Onelink Combo Alarm is capable of identifying the type and location of the danger. You'll also be able to create a personalized smoke and co safety network by interconnecting other compatible alarms.

Mobile Connectivity Through the Onelink Home App

With the Onelink Home app you can test and silence your alarm and assign the locations of each device in your home.

Smart Home Safety Network

Wirelessly interconnect with other First Alert & Onelink devices (sold separately) to create a smart home safety network. When one alarm is triggered, all connected devices will sound off. This alarm is also compatible with Amazon Alexa, so you can ask Alexa to check the status of your Onelink alarm. The Onelink Home App is compatible with both Android and Apple devices.

Voice Alerts and More

Emergency notifications alert you to danger via your phone, while voice and location technology tell you the type and area of danger; the Onelink also uses a traditional 85-decibel siren.

Battery-Operated

The Onelink Smoke & Carbon Monoxide alarm is battery-operated and has an easy access battery door for convenience. This Onelink Alarm comes with a 3 cell battery pack, and based on regular alarm usage, the battery will last approximately five years.

Onelink Battery Operated Smart Smoke + Carbon Monoxide Alarm (3nd Generation) 1042138

Generation Three Onelink Smart Smoke + Carbon Monoxide Alarm - Battery Operated

• 2-in-1 Protection: Photoelectric Smoke and Electrochemical CO sensors
• No low battery chirps in the middle of the night
• 85 decibel Alarm with Voice Alerts
• Voice with Location - Voice announces programmed location of the unit and danger detected
• Multicolor Indicator Ring Provides visual indication of various alarm states
• Wi-Fi and Bluetooth Wireless Interconnect
• Bluetooth Mesh Network Communication/2 way communication allows alarms to speak with one another
• Utilization of Wi-Fi allows users to receive emergency notifications
• Compatibility: Apple HomeKit and Google Play
• Receive notifications via iPhone, iPad and iPad Touch (Requires iOS 9.0 or later)
• Meets UL217 and UL2034 Standards for Smoke and CO Alarms
• Product Dimensions (LxWxH): 5.88 x 5.88 x 1.57 in.
• Product Weight: 0.75 lbs.
• Warranty: 5 Year Limited

Onelink Smart Smoke + Carbon Monoxide Alarm - AC Power

Add intelligent protection to your home with the Onelink Smoke & Carbon Monoxide alarm. This 2-in-1 combo alarm detects both smoke and carbon monoxide. Regardless of whether you're home or away, you'll be notified when smoke or co is detected. This First Alert Onelink Combo Alarm is capable of identifying the type and location of the danger. You'll also be able to create a personalized smoke and carbon monoxide safety network by interconnecting other compatible alarms.

Mobile Connectivity through the Onelink Home App

This alarm sends you notifications in the event of a smoke or carbon monoxide emergency. With the Onelink Home app, you can also test and silence your alarm.

Smart Home Safety Network

Wirelessly interconnect with other First Alert & Onelink devices (sold separately) to create a smart home safety network. When one alarm is triggered, all connected devices will sound off. This alarm is also compatible with Amazon Alexa, so you can ask Alexa to check the status of your Onelink alarm. The Onelink Home App is compatible with both Android and Apple devices.

Voice Alerts and More

Emergency notifications alert you to danger via your phone, while voice and location technology tell you the type and area of danger; the Onelink also uses a traditional 85-decibel siren.

Hardwired Alarm with Easy Setup and Installation

The Onelink Smoke & Carbon Monoxide Alarm connects easily to electrical systems using the included AC adapter plugs so you don't have to rewire (AC power is required for Onelink). Includes a 10 year sealed lithium battery backup so you are always protected even in a power outage.

Battery Backup for Continuous Protection

This Hardwired Onelink Smoke & CO Alarm is equipped with a ten year sealed battery backup for protection during power outages.

Onelink Hardwired Smart Smoke + Carbon Monoxide Alarm (3nd Generation) 1042135 (Model #) 1042137 (sku #)

Generation Three Onelink Smart Smoke + Carbon Monoxide Alarm - AC Power

• 2-in-1 Protection: Photoelectric Smoke and Electrochemical CO sensors
• 10-year sealed battery backup provides continuous protection in the event of a power outage
• No low battery chirps in the middle of the night
• 85 decibel Alarm with Voice Alerts
• Voice with Location - Voice announces programmed location of the unit and danger detected
• Multicolor Indicator Ring Provides visual indication of various alarm states
• Wi-Fi and Bluetooth Wireless Interconnect
• Bluetooth Mesh Network Communication/2 way communication allows alarms to speak with one another
• Utilization of Wi-Fi allows users to receive emergency notifications
• Compatibility: Apple HomeKit and Google Play
• Receive notifications via iPhone, iPad and iPad Touch (Requires iOS 9.0 or later)
• Meets UL217 and UL2034 Standards for Smoke and CO Alarms
• Product Dimensions (LxWxH): 5.88 x 5.88 x 1.57 in.
• Product Weight: 0.75 lbs.
• Warranty: 5 Year Limited

Smart Smoke + Carbon Monoxide Alarm and Speaker with Amazon Alexa

Introducing the First Alert Onelink Safe & Sound, the first-ever smart smoke and carbon monoxide alarm with Alexa Voice Services enabled, so you can enjoy the full suite of features found on Amazon Echo. Ask Safe & Sound to play music or audio-books, read you the news, control smart home devices, and more. Leveraging your home's hard-wiring and using optimal ceiling placement, Safe & Sound fills any room with immersive, 360-degree high-end audio. Advanced microphones let Safe & Sound hear your voice commands from any direction-even when music is playing

This 3-in-1 alarm is also powered by First Alert's intelligent smoke and carbon monoxide protection, and warns you about danger in your home and its location with an 85-decibel alarm plus voice alert. With First Alert's free Onelink Home app, Safe & Sound can also remotely notify you of a smoke or carbon monoxide emergency in your home via your phone or tablet. Safe & Sound installs just like a standard hardwired smoke alarm, so you can easily replace existing alarms. Adapter plugs are included to save you the hassle of rewiring and to simplify installation.

Onelink Safe & Sound Smart Smoke + Carbon Monoxide Alarm 1039102

• Photoelectric smoke sensor, electrochemical carbon monoxide sensor.
• Voice and location technology.
• 10 year sealed battery/no costly battery replacements for the life of the alarm.
• RGB LED color ring for night light and visual warning detection.
• Wi-Fi connection, iOS 8 or higher or Android 5.0 or higher, Alexa App, Free Onelink App & Account.
• Onelink Safe & Sound, mounting bracket and hardware, AC adapter plugs, user's manual.
• Dimensions: 6.80 x 6.80 x 2.26 in. | Weight: 1.5 lbs.
• Warranty: 3-Year Limited
• Included in box: Onelink Safe & Sound alarm, mounting bracket and hardware, AC adapter plugs, user's manual.