Skip to content
Home > Products > Detectors > Smoke Detectors > Hardwired Smoke Detectors > Hardwired Photoelectric Smoke Detector
Sort By:
Page of 1
BRK RM4 Relay Module - Activates Auxuliary Warning Devices - For Use with BRK and First Alert Smoke Alarms BRK Relay Module - Activates Auxuliary Warning Devices - For Use with BRK and First Alert Smoke Alarms

The RM4 is designed to activate an auxiliary device when an alarm is initiated. The RM4 Relay is intended for use with BRK and First Alert Smoke, Heat and Carbon Monoxide Alarms. The relay contacts will activate whenever any interconnected alarm sounds. The relay contacts will automatically deactivate a few seconds after the alarm stops sounding. The RM4 may be wired next to an AC alarm or from a remote location. This relay must be installed in a junction box.

Interconnects smoke alarms, carbon monoxide alarms and heat alarms with:
Lights,Bells,Door Closers,Sirens,Exit Signals,Escape Lights,Exhaust Fans,Other Auxiliary Devices

Our Price: $15.95 Free 2-3 Day Shipping-ALL ORDERS SHIP IN 24HRS
BRK First Alert 7010 Hardwired Photoelectric Smoke Alarm BRK First Alert 7010 Hardwired Photoelectric Smoke Alarm**DISCONTINUED, LINK TO NEW UNIT BELOW**

CLICK HERE TO GO TO 7010B, THE REPLACEMENT UNIT

The BRK hardwired smoke alarm with photoelectric sensor is designed to reduce common "nuisance" alarms. It's an excellent choice for installations in or near kitchens, near fireplaces, or in hallways directly outside bathrooms, utility rooms, or other areas prone to steam. This alarm is also a popular choice for hotel/motel applications. The 7010 AC-powered smoke alarm with photoelectric sensor includes these features: Photoelectric sensor which is more effective at detecting smoldering fires which smolder for hours before bursting into flame. 120-volt AC inter-connectable (with maximum 18 compatible devices). The alarm can be interconnected with up to 12 other compatible smoke alarms and six compatible devices like bells, horns, repeaters and door closers. If one unit triggers an alarm, all smoke alarms in the series will sound. Power indicators show which unit in the series initiated the alarm. Quick plug-in power connector for easy installation. Alarm indication which in an interconnected system, automatically identifies which unit initiated the alarm. Optipath 360 technology allows 360-degree access to the layer of air on the ceiling or wall that carries the fire signatures (smoke, combustion particles and volatile components). Single test/silence button which both silences a non-threatening alarm or low battery warning and allows you to test the unit's functionality. Locking feature for tamper resistance. 10-year limited warranty.

SPECS:


10-Years Limited Warranty

Model #7010

Weight6.7 oz

Dimension5.0" dia x 2.1"H

Operating Voltage120V AC 60Hz

Operating Current.045 amps (standby/alarm)

Temperature Range40°F (4°C) to 100°F (38°C)

Humidity Range10% to 90% relative humidity (RH)

Audio Alarm85dB at 10 feet

Test/SilenceElectronically simulates smoke condition, causing the unit to alarm Press and hold test/silence button

Alarm ResetAutomatic when smoke clears

InterconnectionsUp to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum of 12 smoke alarms. See user's manual for details.

Smoke SensorPhotoelectric

Indicator Lights/Sounds

AC Power: Constant Green LED

Local Alarm: Red LED flashes rapidly

Remote Alarm: Red LED out.

ListingListed to UL217 Standard

Our Price: $16.95 **DISCONTINUED, LINK TO NEW UNIT BELOW**
First Alert 7010B Hardwired Photoelectric Smoke Alarm with Battery Backup First Alert 7010B Hardwired Photoelectric Smoke Alarm with Battery Backup

The BRK hardwire smoke alarm with photoelectric sensor is designed to reduce common "nuisance" alarms. It's an excellent choice for installations in or near kitchens, near fireplaces, or in hallways directly outside bathrooms, utility rooms, or other areas prone to steam. This alarm is also a popular choice for hotel/motel applications. The 7010B AC-powered smoke alarm with photoelectric sensor includes these features: Photoelectric sensor which is more effective at detecting smoldering fires which smolder for hours before bursting into flame. 120-volt VAC inter-connectable (with maximum 18 compatible devices). The alarm can be interconnected with up to 12 other compatible smoke alarms and six compatible devices like bells, horns, repeaters and door closers. If one unit triggers an alarm, all smoke alarms in the series will sound. Power indicators show which unit in the series initiated the alarm. Quick plug-in power connector for easy installation. 9-volt battery backup for peace of mind during power malfunction. Alarm indication which in an interconnected system, automatically identifies which unit initiated the alarm. Optipath 360 technology allows 360-degree access to the layer of air on the ceiling or wall that carries the fire signatures (smoke, combustion particles and volatile components). Single test/silence button which both silences a non-threatening alarm or low battery warning and allows you to test the unit's functionality. Locking feature for tamper resistance. 10-year limited warranty.


Specs:

10-Years Limited Warranty

Model # 7010B

Weight 8.4 oz

Dimension 5.0" dia x 2.1"H

Operating Voltage 120V AC 60Hz w/ 9V battery backup

Operating Current .045 amps (standby/alarm)

Temperature Range 40°F (4°C) to 100°F (38°C)

Humidity Range 10% to 90% relative humidity (RH)

Audio Alarm 85dB at 10 feet

Test/Silence Electronically simulates smoke condition, causing the unit to alarm Press and hold test/silence button

Alarm Reset Automatic when smoke clears

Interconnections Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum of 12 smoke alarms. See user's manual for details.

Smoke Sensor Photoelectric

Indicator Lights/Sounds

AC Power: Constant Green LED

DC Power: Intermittent Red LED

Local Alarm: Red LED flashes rapidly

Remote Alarm: Red LED out.

Listing Listed to UL217 Standard


Our Price: $21.95 Free 2-3 Day Shipping-ALL ORDERS SHIP IN 24HRS
BRK First Alert 7020B Hardwired Photoelectric Smoke Alarm with Escape Light and Battery Backup BRK First Alert 7020B Hardwired Photoelectric Smoke Alarm with Escape Light and Battery Backup

The BRK Electronics 7020B comes equipped with all the great features you would expect from an outstanding smoke detector. The BRK 7020B utilizes a photoelectric smoke sensing chamber that detects smoke particles quickly and accurately, reducing the amount of nuisance alarms. Also included in the BRK 7020B is a 85db horn, a silence / test button, an easy access battery compartment for quick battery changes, a bright escape light, and Red / Green LED indicators to let you know if your BRK 7020B Smoke Alarm is working properly, and is in alarm mode (or DC mode). The BRK 7020B uses OptiPath36O Technology which provides a 360 degree coverage area allowing coverage to the ceiling and walls. In addition to housing so many important features, the BRK 7020B is capable of being interconnected to up to 18 devices, 12 of which can be smoke alarms.

Warranty 10 Years

Model # 7020B

Weight 8.4 oz

Dimension 5.0" dia x 2.1"H

Operating Voltage 120V AC 60Hz w/ 9V battery backup

Operating Current .045 amps (standby/alarm)

Temperature Range 40 °F (4°C) to 100°F (38°C)

Humidity Range 10% to 90% relative humidity (RH)

Audio Alarm 85dB at 10 feet

Test/Silence Electronically simulates smoke condition, causing the unit to alarm Press and hold test/silence button

Alarm Reset Automatic when smoke clears

Interconnections Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum of 12 smoke alarms. See user's manual for details.

Smoke Sensor Photoelectric

Indicator Lights/Sounds

AC Power: Constant Green LED

DC Power: Intermittent Red LED

Local Alarm: Red LED flashes rapidly

Remote Alarm: Red LED out.

Listing Listed to UL217 Standard


Our Price: $23.95 **DISCONTINUED, LINK TO NEW UNIT COMING SOON**
First Alert SA521CN(SA520) ONELINK Hardwired Wireless Photoelectric Smoke Alarm with Battery Backup First Alert SA521CN(SA520) ONELINK Hardwired Wireless Photoelectric Smoke Alarm with Battery Backup

The SA521CN(SA520) is a Hardwired/Wireless/Photoelectric smoke detector. With the First Alert SA521CN(SA520) you can easily connect the alarm to a network of other smoke alarms through its wireless connection as well as the hardwiring. It works as a bridge unit to connect your existing hardwired alarms and expand with other Onleink Wireless alarms. This 120V AC system can replace any standard fire alarm that is hardwired. You can then expand on your existing hardwired network by Wireless link to any of the other Onelink Wireless Smoke or CO alarms.

SPECS:
OneLink enabled alarm
Bridge Unit - Wireless Photoelectric Hardwired Smoke Alarm
Single button test/silence
Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm
Add additional OneLink alarms and hardwired alarms. Links all alarms together for a complete system.
Hardwired interconnect and RF Interconnect: reliable and secure radio frequency communication between alarms. 915 MHz frequency with 65,000 security codes and 3 channel frequency hopping.
Optipath 360 TechnologyTM - patented technology provides 360 degrees of direct access to the smoke sensor.
Perfect Mount - allows for easy alignment of alarm
Spread Spectrum Horn Tone - Lower and varying frequency makes it easier for the elderly with normal aged related hearing loss to hear the horn.
Latching Features: Alarm Latch - remembers which unit initiated an alarm. Low Battery Latch: Visually indentifies unit in low battery condition.
10-Years Limited Warranty
Model # SA520
Weight 9.3 oz
Operating Voltage 120V AC with battery backup (Two 1.5V AA Batteries)
Humidity Range 10% to 90% relative humidity (RH)
Smoke Sensor Photoelectric
Listing ETL to UL 217 standard

Our Price: $37.95 Free 2-3 Day Shipping-ALL ORDERS SHIP IN 24HRS
BRK First Alert 7010BSL Hardwired Photoelectric Smoke Detector with Battery Backup & Strobe***DISCONTINUED, LINK TO NEW ALARM BELOW*** BRK First Alert 7010BSL Hardwired Photoelectric Smoke Detector with Battery Backup & Strobe***DISCONTINUED, LINK TO NEW ALARM BELOW***

***DISCONTINUED, LINK TO NEW ALARM BELOW***

Click here --> BRK First Alert 7020BSL <--Click here


The First Alert BRK Model Number 7010BSL is a hardwired photoelectric smoke alarm with integrated 177 candela strobe light. The First Alert 7010BSL not only has the ADA approved strobe light but the best smoke detection you can get, Photoelectric. The 7010BSL also has smart strobe technology which will pulse in different rates to tell you if you have smoke or carbon monoxide. YOU MUST HAVE A CO DETECTOR within your system and interconnected to this unit for that to work. If you are deaf or simply have some hearing loss the 7010BSL is your best option to protect your home. The First Alert 7010BSL is specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multifamily dwellings as defined in standard NFPA 101. Model 7010BSL complies with UL217, UL1971, CSFM, NFPA 72, HUD, FHA and other agencies that model their codes after the above agencies. They meet building codes where AC with battery backup, silence, photoelectric smoke alarms are required. The alarms are interconnectable with up to 18 devices, of which 12 can be smoke alarms. One device includes both a strobe light and photoelectric smoke alarm and only requires one electrical box. Saves installation time.

SPECS:
Model # 7010BSL
177 CANDELA XENON STROBE. Powerful 177 candela xenon strobe light provides effective visual warning to hearing impaired residents.
1 Hz FLASH RATE. 60 fl ashes per minute rate meets ADA, ANSI 117.1
NFPA 72 and UL1971 requirements for visual signal devices.
OPTIPATH 360 TECHNOLOGY. Provides 360 degrees of direct access to the smoke sensing chamber.
BATTERY BACKUP.Two AAA batteries provide backup for the smoke alarm during power outages. (Note: will not power the strobe light).
Weight 10.9 oz
Dimension 5.1" dia x 4.0"H
Operating Voltage 120V AC 60Hz w/ two AAA battery backup for smoke alarm (Note: will not power the strobe light).
Voltage Range: 108V AC to 132V AC Operating Current 0.05/0.60 amps (standby/alarm)
Temperature Range 40°F (4°C) to 100°F (38°C)
Humidity Range 10% to 90% relative humidity (RH)
Audio Alarm 85dB at 10 feet
Test/Silence Electronically simulates smoke condition, causing the unit to alarm
Press and hold test/silence button Alarm Reset Automatic when smoke clears
Interconnections Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms.
Maximum of 12 smoke alarms. See user's manual for details.
Smoke Sensor Photoelectric
Strobe Light 177 candela Xenon strobe Flash Rate: 1 Hz. Smoke Alarm: Constant approx. 1 fl ash per second CO Alarm: Intermittent approx. 1 flash per second for four flashes, then 5 seconds off. Pattern is repeated.
Indicator Lights/Sounds AC Power: Constant Green LED DC Power: Intermittent Red LED Local Alarm: Red LED flashes rapidly Remote Alarm: Red LED out.
Listing Listed to UL217 & UL1971 Standards

Our Price: $89.95 Free 2-3 Day Shipping-ALL ORDERS SHIP IN 24HRS***DISCONTINUED, LINK TO NEW ALARM BELOW***
First Alert 7020BSL Hardwired Photoelectric Smoke Alarm with battery Backup BRK First Alert 7020BSL Hardwired Photoelectric Smoke Alarm & LED Strobe with 10 Year Sealed Battery Backup

Hardwired smoke alarm with 10-Year battery back-up and integrated 177 candela LED strobe meets codes where a photoelectric smoke sensor and an ADA approved strobe is required.
AC Powered with 10-Year Sealed Battery Backup
» Integrated Smoke Alarm & Strobe Light – saves time & money! Requires only one junction box
» Smart Strobe – Separate flash patterns to distinguish between smoke and carbon monoxide
» 177 Candela Synchronized LED – Powerful LED strobe light provides effective visual warning intended to waken hearing impaired residents. When multiple units installed, strobes flash in unison
» 1Hz Flash Rate – Meets ADA, ANSI 117.1, NFPA 72 and UL STD 1971
» Optipath 360 TechnologyTM – Provides 360 degrees of direct access to the smoke sensing chamber
» Slim design
» 10-Year Limited Warranty

Model #:7020BSL SKU #: 1038335

Our Price: $89.95 Free 2-3 Day Shipping-ALL ORDERS SHIP IN 24HR
Halo Smart Alarm Smoke and Carbon Monoxide Detector Halo Smart Smoke & CO Alarm, Hardwired w/10 Year Battery Backup

Protect your home and family with this hardwired, 120V, Halo smoke and CO alarm. Halo combines six different sensors work together to help identify real fires while reducing false alarms and giving greater peace of mind. If Halo senses a problem, a voice alert will instantly tell you what’s wrong, a ring of light illuminates and you’ll get an alert on your smartphone.

Smoke/Carbon Combo alarm with dual sensor technology
Ionization and photoelectric sensors detect smoldering and flaming fires. Also detects carbon monoxide. Smart sensors reduce unwanted false alarms.

Visual and audible alerts
Halo provides voice alerts (pre-alerts and emergency alarms) in addition to the standard alarm sound, as well as visual information using its built-in LED ring.

Smart Hush
Alerts can be silenced by using the Halo app or pressing the center Halo button.

Wi-Fi Connectivity
For all additional features of Halo, which include the accent light control, wireless mobile notification, and room naming.

Halo App for iOS or Android
Use your smart device to complete your Halo setup with ease and always stay informed. Get alerts while your away from home using your smartphone from wherever you are.

Connectivity
Use Halo as part of a whole home safety and security system. Works with Lowe’s Iris, Samsung SmartThings, Amazon Alexa and others.

10-year Rechargeable Battery Back-up
Never get out of bed to take down a smoke alarm again.

Technical Specifications
Halo Smart Smoke and Carbon Monoxide Alarm, Wired 120 VAC (60Hz Max 0.1A) Non-User Serviceable Rechargeable Lithium Battery Backup

ANSI/UL 2034 - “Single and Multi-Station Carbon Monoxide Alarms” ANSI/UL 217 - “Single and Multi-Station Smoke Alarms”

Weight: 10.5 oz. (0.65 lbs.) Dimensions: 6.5” (H) x 6.5” (W) x 1.52” (L)

Requires a working Wi-Fi connection.
802.11 a/b/g/n @ 2.4 GHz Wi-Fi
IEEE 802.15.4 @ 2.4GHz ZigBee

Wired Interconnect, Detects carbon monoxide, Dual-smoke detecting sensors, Pre-Alerts alerts, App Silence, Sensor failure, Voice alarms , 10-year product lifetime, 3-year limited warranty, Self Test, Accent Light, ZigBee HA Device, Halo App

Sensors: Photoelectric Sensor , Ionization Sensor, Carbon Monoxide Sensor, Temperature Sensor, Humidity Sensor, Barometric Pressure Sensor

Indicators
Pre-Alert Smoke: Amber Pulse

Smoke: Red and White Flash
Carbon Monoxide: Red Flash

In The Box
1x Halo, 1x Power Connector (120V), 1x Mounting Plate, 3x Wire Nuts, 2x Mounting Screws, 1x User Guide, 1x Quick Start Guide

Our Price: $129.00 Free 2-3 Day Shipping-ALL ORDERS SHIP IN 24HRS
Halo Smart Alarm Smoke and Carbon Monoxide Detector Halo+ Smart Smoke & CO Alarm w/Weather Alerts, Hardwired w/10 Year Battery Backup

All the features of Halo + another industry first: Weather Alerts. Use the free Halo app to customize the weather alerts based on your preferences. Get the added protection of Halo+ for complete peace of mind. Halo+ is the only smoke alarm to deliver weather and disaster alerts, including tornadoes, floods and hurricanes.

Protect your home and family with this hardwired, 120V, Halo smoke and CO alarm. Halo combines six different sensors work together to help identify real fires while reducing false alarms and giving greater peace of mind. If Halo senses a problem, a voice alert will instantly tell you what’s wrong, a ring of light illuminates and you’ll get an alert on your smartphone.

Smoke/Carbon Combo alarm with dual sensor technology
Ionization and photoelectric sensors detect smoldering and flaming fires. Also detects carbon monoxide. Smart sensors reduce unwanted false alarms.

Visual and audible alerts
Halo provides voice alerts (pre-alerts and emergency alarms) in addition to the standard alarm sound, as well as visual information using its built-in LED ring.

Smart Hush
Alerts can be silenced by using the Halo app or pressing the center Halo button.

Wi-Fi Connectivity
For all additional features of Halo, which include the accent light control, wireless mobile notification, and room naming.

Halo App for iOS or Android
Use your smart device to complete your Halo setup with ease and always stay informed. Get alerts while your away from home using your smartphone from wherever you are.

Connectivity
Use Halo as part of a whole home safety and security system. Works with Lowe’s Iris, Samsung SmartThings, Amazon Alexa and others.

10-year Rechargeable Battery Back-up
Never get out of bed to take down a smoke alarm again.

Technical Specifications
Halo Smart Smoke and Carbon Monoxide Alarm, Wired 120 VAC (60Hz Max 0.1A) Non-User Serviceable Rechargeable Lithium Battery Backup

ANSI/UL 2034 - “Single and Multi-Station Carbon Monoxide Alarms” ANSI/UL 217 - “Single and Multi-Station Smoke Alarms”

Weight: 10.5 oz. (0.65 lbs.) Dimensions: 6.5” (H) x 6.5” (W) x 1.52” (L)

Requires a working Wi-Fi connection.
802.11 a/b/g/n @ 2.4 GHz Wi-Fi
IEEE 802.15.4 @ 2.4GHz ZigBee

Wired Interconnect, Detects carbon monoxide, Dual-smoke detecting sensors, Pre-Alerts alerts, App Silence, Sensor failure, Voice alarms , 10-year product lifetime, 3-year limited warranty, Self Test, Accent Light, ZigBee HA Device, Halo App

Sensors: Photoelectric Sensor , Ionization Sensor, Carbon Monoxide Sensor, Temperature Sensor, Humidity Sensor, Barometric Pressure Sensor

Indicators
Pre-Alert Smoke: Amber Pulse
Smoke: Red and White Flash
Carbon Monoxide: Red Flash

In The Box
1x Halo, 1x Power Connector (120V), 1x Mounting Plate, 3x Wire Nuts, 2x Mounting Screws, 1x User Guide, 1x Quick Start Guide

Our Price: $149.00 Free 2-3 Day Shipping-ALL ORDERS SHIP IN 24HRS